LCD controller with four electrode pads and two output cables.
Pocket TENS Massager with Pads
A pocket-sized TENS unit with four electrode pads and two output cables, sold as a starter therapy device for home use.
- Fifteen power levels across eight modes
- LCD screen, 145 × 68 × 20 mm controller
- Four electrode pads and two output cables
- Works on body, foot, arm, hand, waist, neck, leg and back
- 150 mAh battery, Type-C charging, 5–15 minute sessions
Where It Fits
On the M304 the standard build is: Power levels: 1–15; Screen: LCD digital; Working modes: 8. It ships with 1 controller, 4 electrode pads, 2 connect cables, 1 USB cable and user manual in a Colour box. Every quote carries the carton data on the PI, so freight is calculated on the numbers that actually ship rather than an estimate.
Modes
Eight programmes over fifteen levels, chosen on the LCD controller.
Electrode pads
Four pads and two cables, so two areas can be worked from one unit.
Minutes per session
Session length is set on the device, which keeps the daily-use pattern simple.
Technical Details
| Power levels | 1–15 |
|---|---|
| Screen | LCD digital |
| Working modes | 8 |
| Voltage | 3.7 V |
| Material | ABS + silicon patch |
| Application | Body, foot, arm, hand, waist, neck, leg, back |
| Controller size | 145 × 68 × 20 mm |
| Battery | 150 mAh / 0.555 Wh lithium |
| Working time | 5–15 minutes |
| Charging port | Type-C |
Values are the factory specification for the standard configuration. Custom specification is possible above MOQ and is quoted per project.
Price by Quantity
Indicative FOB Shenzhen unit price for the standard configuration. The binding price is on the PI and is held for 15 days.
| Quantity | Unit price |
|---|---|
| 200–499 pcs | USD 12.00 |
| 500–999 pcs | USD 10.00 |
| 1,000+ pcs | USD 8.50 |
Freight, duties and destination registration are quoted on top of the unit price. Ladder pricing applies per model, not per shipment, so mixing models in one order does not drop the band.
Retail Box and Export Carton
Carton data decides the freight quote, so it is listed here rather than sent as a PDF.
| Retail packaging | Colour box, 190 × 96 × 49 mm |
|---|---|
| Unit weight | 120 g / 188 g with colour box |
| Units per carton | 60 pcs |
| Gross weight | 14 kg |
| Carton dimensions | 51 × 39 × 30 cm |
Small carton at 14 kg gross — cheap to air freight, which matters for sample and small bulk orders.
Make It Yours (OEM / ODM)
Logo, colour and packaging are the three changes most buyers make first.
Laser or print on the housing, your mark on the retail box and the manual.
Housing colour and finish from the range on this page, or matched to your sample.
Packaging language, plug type and mode naming adjusted per market. MOQ 300 pcs.
Custom orders start at 300 pcs. Between the stock price and that quantity, ask — there is sometimes room on a running batch.
Certifications and Documents
Released where this model has been tested; confirmed per model in writing with the quote.
Released where this model has been tested; confirmed per model in writing with the quote.
Material declaration released with the quote; full report on request.
Before you order: we are the manufacturer, not the importer. Test reports for the standard model are released with the quote; destination registration — EU authorised representative, FDA listing, EAC, PSE — is agreed in writing before production. The buyer is the importer of record.
What Buyers Ask About This Model
What is the MOQ for the M304?
The ladder starts at 300 pcs. Below that the model ships as a stock unit under the Imazing label, and on some models there is room on a running batch — ask before you assume the answer is no.
Can you print our logo on the M304?
Yes. Logo on the housing, your artwork on the retail box and the manual. Tooling and print setup are quoted per project, and the print proof is approved before production.
Can we order one sample first?
Yes. One unit is quoted at the sample price and leaves Shenzhen in 3–5 days by express. The sample cost is credited against your first bulk order.
Is the specification on this page final?
The values shown are the current factory specification for the standard configuration. If a component changes we tell you before production rather than after shipment.
Which documents come with the M304?
We release the test reports we hold for the standard configuration — CE EMC, FCC Part 15 and RoHS where the model has been tested. Destination registration (EU authorised representative, FDA listing, EAC, PSE) is agreed in writing before production; the buyer is the importer of record.
Other Models Buyers Compare
T-315 · Handheld Percussion Massager
Handheld Percussion Massager with Eight Heads. MOQ 200 pcs.
Quote the M304 for Your Market
Send the quantity and the destination country and we reply within 24 hours with a PI: unit price, freight option and production date. Mention model M304 so the quote comes back correct.
- Unit price at your quantity band, in writing
- Carton data and freight option to your address
- Certification and plug confirmed for your market
- Production date and inspection photos before dispatch